>Here we show that cyclic voltammetry can be used without any additional sample preparation to directly measure the strength of a coffee beverage and, separately, how dark the coffee has been roasted; these two properties are implicated in the sensory profile of the beverage.
those two properties do not even touch on the quality of the beans, nor how those flavors are developed and maintained through roasting. measuring the darkness of roast does not tell you how dark the coffee should have been roasted for optimum flavor profile.
I'm not aware that it can be done analytically, it requires trained tastebuds, and in my experience, tastebuds trained on many coffees over time (a sort of 10,000 hours type idea, probably needs neuroplasticity); most roasters have a sort of narrow "tunnel vision" based around their own coffees which they taste relentlessly.
to actually taste delicious coffee it needs to cool down quite a bit, below 130F 55C which is not very hot. I understand the pleasure of a hot cup of coffee, but that pleasure is not flavor pleasure.
Xmd5a 1 hours ago [-]
Isn't this whole approach to coffee similar to audiophily? I'm asking this as an avid coffee drinker (fancy grains, with a fancy machine) and an appreciator of headphones as well : when should one stop the quest for perfection? For headphones, anything beyond 400-500$ is not reasonable, since past this limit you start chasing gains that are barely perceptible or are a question of taste and you'll be able to find equivalent headphones that cost less.
Where do you draw the limit personally ?
fabian2k 18 minutes ago [-]
I have a 200 EUR handgrinder and an Aeropress. That's about the limit for me, there isn't really anything else to improve there for filter coffee. There's probably a lot more ways to make different coffee, but not that much room for making the same coffee better. I also don't want to mess with the water, so that puts a ceiling on coffee quality anyway.
There's some legitimate room to spend much more money when making Espresso. But a lot of the more expensive options would be more about the workflow than quality. If you need to make many Espressos in quick succession you'll hit the limits of cheaper equipment.
ricardobayes 29 minutes ago [-]
I think it's very comparable: the current dialogue in "coffee" circles revolve around the usage of "steamed water" that supposedly improves the taste. I remember similar discussions around cables in audio circles.
benj111 3 minutes ago [-]
Well steamed water was a rabbit hole.
Although surely you would need to make the steam from steamed steam for optimal results?
anon84873628 4 hours ago [-]
Yes, but once your target roast and strength is dialed in, this can easily be used for quality control. Keep in mind that the coffee industry is very different than home specialty brews.
zeristor 1 days ago [-]
How long before James Hoffman finds out about this.
Waiting for him to appear in the YouTube shorts Brooklyn Coffee shop now I think about it.
SkiFreeWin3 7 hours ago [-]
It took me a few vids to warm up to his presentation style and the production style, but now anyone else doing coffee vids seems like a total amateur/influencer/YT rusher. Early Hoffman coffee competitions were the proof point for me that he’s not simply an influencer entrant.
His presentation still is still a bit forced and orchestrated to me, but at least I believe he’s smart and has interest in the craft.
jitl 4 hours ago [-]
he’s adorable what’s not to love??
andreareina 4 hours ago [-]
What does this offer over the refractometer he already has?
advisedwang 5 hours ago [-]
I suppose this might be useful for making full-auto coffee machines that can self-adjust parameters like grind size, water:coffee ratio, tamping strength (for espresso style machines) etc. Although there's plenty of things to measure already, they don't really directly check correct brewing. This could help improve a lot.
anon84873628 4 hours ago [-]
From the lab of Christopher Henson at University of Oregon. They've done lots of work on coffee.
At the SCA Expo a few years ago, they were doing electrochemistry on brewed coffee to measure caffeine content, and also change the flavor in weird ways. This latest paper seems to build on previous experiments in a similar vein: https://sca.coffee/sca-news/25/issue-18/amped-up-using-elect...
userbinator 6 hours ago [-]
I suggest "black coffee electrochemical quality appraisal"; as-is, it made me wonder what "electrochemical black coffee" is.
euroderf 2 hours ago [-]
It has electrolytes!
RobotToaster 1 hours ago [-]
Amazing that the article describes what coffee is in detail, but never describes what "cyclic voltammetry" is.
I sent this to our electrochemist at work, maybe if we have some time we can test the coffee in the breakroom.
xingped 5 hours ago [-]
The title says "quality" but the summary seems to say it only measures the "strength" oand "darkness of roast". Certainly won't measure how good it tastes. Given these are the two properties purportedly measured, I imagine you'd get the same results regardless of tastiness and age of the coffee or beans.
those two properties do not even touch on the quality of the beans, nor how those flavors are developed and maintained through roasting. measuring the darkness of roast does not tell you how dark the coffee should have been roasted for optimum flavor profile.
I'm not aware that it can be done analytically, it requires trained tastebuds, and in my experience, tastebuds trained on many coffees over time (a sort of 10,000 hours type idea, probably needs neuroplasticity); most roasters have a sort of narrow "tunnel vision" based around their own coffees which they taste relentlessly.
to actually taste delicious coffee it needs to cool down quite a bit, below 130F 55C which is not very hot. I understand the pleasure of a hot cup of coffee, but that pleasure is not flavor pleasure.
Where do you draw the limit personally ?
There's some legitimate room to spend much more money when making Espresso. But a lot of the more expensive options would be more about the workflow than quality. If you need to make many Espressos in quick succession you'll hit the limits of cheaper equipment.
Although surely you would need to make the steam from steamed steam for optimal results?
Waiting for him to appear in the YouTube shorts Brooklyn Coffee shop now I think about it.
His presentation still is still a bit forced and orchestrated to me, but at least I believe he’s smart and has interest in the craft.
Doran and Chris also host a podcast called Coffee Literature Review, where they invite a guest from the coffee industry and discuss a scientific paper connected to coffee somehow: https://podcasts.apple.com/us/podcast/coffee-literature-revi...
At the SCA Expo a few years ago, they were doing electrochemistry on brewed coffee to measure caffeine content, and also change the flavor in weird ways. This latest paper seems to build on previous experiments in a similar vein: https://sca.coffee/sca-news/25/issue-18/amped-up-using-elect...
For those who are as ignorant as I https://en.wikipedia.org/wiki/Cyclic_voltammetry